Spectra Watermakers

Spectra Watermakers 1HP 24V DC 1800 RPM TEFC 56C MOTOR EL-MTR-1D24

$1,498.00
Current stock: 0
Item #: EL-MTR-1D24
Availability:
Manuals & support

Start with your model’s parts diagram and the number on the installed part. Match any model, controls, voltage, or serial-range notes shown in this listing.

Spectra / Katadyn manufacturer support ↗
Overview

Overview

EL-MTR-1D24 is the 24V DC motor identified in the Newport 700/1000 feed-pump module. Its rated output is 1 HP at 1,800 RPM, with a 56C frame and TEFC enclosure.

The DC module drawing identifies the vane pump and PWM assembly separately. The older Mk1 drawing also separates the motor coupling and adaptor from the motor.

Match the DC module revision, pump drive and controller before selecting replacement components.

Specifications & Contents

Specifications & Contents

Part numberEL-MTR-1D24
Motor24V DC; 1 HP; 1,800 RPM
Frame / enclosure56C / TEFC
Fits My System

Fits My System

Match the DC module revision, pump drive and controller before selecting replacement components.

Select your configuration to see its requirements, or open the complete reference below.

All documented configurations and requirements

Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.

Documented configurations

  • Newport 1000 Mk II · MPC 5000 · Match installed voltage and hardware
  • Newport 700 Mk II · MPC 5000 · Match installed voltage and hardware

Original 24V DC feed motor/cable-stud arrangement in this legacy generation; match the actual motor and insulated stud position. System input: 24 V; retain the specified component supply and wiring.

Parts diagram / guide, page 61

Documented configurations

  • Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
  • Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware

Original 24V DC feed motor/cable-stud arrangement in this legacy generation; match the actual motor and insulated stud position. System input: 24 V; retain the specified component supply and wiring.

Parts diagram / guide, page 87

Documented configurations

  • Newport 1000C · Connect · 24 VDC · Standard / long membranes · NP-1000C-24
  • Newport 700C · Connect · 24 VDC · Standard / long membranes · NP-700C-24

24V system feed motor.

Parts diagram / guide, page 97

Documented configurations

  • Newport 1000C · Connect · 24 VDC · Standard / long membranes · NP-1000C-24
  • Newport 700C · Connect · 24 VDC · Standard / long membranes · NP-700C-24

Newport 700/1000 24V electrical module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. System input: 24V; retain the documented component supply and wiring. 24V module; control board needs correct model firmware. Historical PWMA24-to-PWMA order-code equivalence remains a separate issue.

Parts diagram / guide, page 97

Manuals & Resources
Reviews

Customer reviews

Be the first to review this product.