Overview
Overview
EL-MTR-3/4AC220 is identified in Spectra’s Newport 700/1000 AC module drawing as a 3/4 HP, 240V AC, three-phase motor with a 56C frame. The drawing uses 240V even though the part number ends in 220.
The same AC module drawing lists different speed controllers for 110V and 220V incoming power. Those supply options do not change the three-phase designation printed for the motor.
Match the motor nameplate and installed AC drive. For older Mk1 modules, the coupling and adaptor are separately identified components.
Specifications & Contents
Specifications & Contents
| Part number | EL-MTR-3/4AC220 |
|---|---|
| Manufacturer motor label | 3/4 HP; 240V AC; three-phase |
| Frame | 56C |
Fits My System
Fits My System
Match the motor nameplate and installed AC drive. For older Mk1 modules, the coupling and adaptor are separately identified components.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Newport 1000 Mk II · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II · MPC 5000 · Match installed voltage and hardware
240V three-phase motor driven by the documented AC speed controller. 110/220V system input does not mean the motor connects directly to that input; retain the matching drive. System input: 110/220 V; retain the specified component supply and wiring.
Documented configurations
- Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware
240V three-phase motor driven by the documented AC speed controller. 110/220V system input does not mean the motor connects directly to that input; retain the matching drive. System input: 110/220 V; retain the specified component supply and wiring.
Documented configurations
- Newport 1000 · MPC 3000 · Match installed voltage and hardware
- Newport 700 · MPC 3000 · Match installed voltage and hardware
Original direct-drive Newport Mk I assembly. Motor is the three-phase AC motor used with its drive; retain this generation and vacuum-switch arrangement. System input: 110/220 V; retain the specified component supply and wiring.
Documented configurations
- Newport 1000C · Connect · 110 VAC · Standard / long membranes · NP-1000C-110
- Newport 1000C · Connect · 220 VAC · Standard / long membranes · NP-1000C-220
- Newport 700C · Connect · 110 VAC · Standard / long membranes · NP-700C-110
- Newport 700C · Connect · 220 VAC · Standard / long membranes · NP-700C-220
AC feed motor in documented AC configuration; motor voltage alone does not describe incoming system voltage.
Documented configurations
- Newport 1000C · Connect · 110 VAC · Standard / long membranes · NP-1000C-110
- Newport 1000C · Connect · 220 VAC · Standard / long membranes · NP-1000C-220
- Newport 700C · Connect · 110 VAC · Standard / long membranes · NP-700C-110
- Newport 700C · Connect · 220 VAC · Standard / long membranes · NP-700C-220
Newport 700/1000 AC electrical module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. System input: 110/220V; retain the documented component supply and wiring. Match AC motor drive and exact configured board; motor output voltage is not the system input voltage.