Spectra Watermakers
Spectra Watermakers Cruise Kit C KIT-BCK-C
$224.00
Manuals & support
Start with your model’s parts diagram and the number on the installed part. Match any model, controls, voltage, or serial-range notes shown in this listing.
Spectra / Katadyn manufacturer support ↗Overview
Overview
KIT-BCK-C is the Basic Cruise Kit C listed in the legacy Newport 400 manual. Its suggested-spares section describes three filters each at 50, 20 and 5 microns, plus two SC-1 storage chemicals.
The same section lists charcoal elements and feed-pump heads separately for longer trips. Those additional spares are not included in the stated basic-kit contents.
This is a historical contents reference. Match the installed filter arrangement and current kit packing list before relying on it for a voyage.
Specifications & Contents
Specifications & Contents
| Part number | KIT-BCK-C |
|---|---|
| Legacy listed filters | Three each: 50, 20 and 5 microns |
| Legacy listed storage chemical | Two SC-1 units |
Fits My System
Fits My System
This is a historical contents reference. Match the installed filter arrangement and current kit packing list before relying on it for a voyage.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Catalina 300 · MPC 5000 · Match installed voltage and hardware
Cruise consumables kit; confirm current kit contents and installed filter stages. Carry-on spares quantity is not system installation quantity.
Documented configurations
- Newport 1000 · MPC 3000 · Match installed voltage and hardware
- Newport 700 · MPC 3000 · Match installed voltage and hardware
Cruise consumables kit; confirm current kit contents and installed filter stages. Carry-on spares quantity is not system installation quantity.
Documented configurations
- Newport 400 · MPC 5000 · Match installed voltage and hardware
Cruise consumables kit; confirm current kit contents and installed filter stages. Carry-on spares quantity is not system installation quantity.
