Overview
Overview
FT-FTH-10L is the low-pressure housing identified in Spectra’s chart and legacy Catalina flush-module drawing. The carbon cartridge, bracket, valves and hose fittings are separately labeled in that drawing.
The chart distinguishes this housing from the discontinued standard FT-FTH-10 and the later three-piece FT-FTH-10L3PCS. Similar clear bowls do not establish interchangeable caps, seals or tools.
Match the exact housing number and head/bowl design. Low-pressure is the manufacturer’s description, not a verified numerical working-pressure limit.
Specifications & Contents
Specifications & Contents
| Part number | FT-FTH-10L |
|---|---|
| Manufacturer component | Low-pressure filter housing |
| Catalog appearance | Clear |
Fits My System
Fits My System
Match the exact housing number and head/bowl design. Low-pressure is the manufacturer’s description, not a verified numerical working-pressure limit.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Catalina 300 · MPC 5000 · Match installed voltage and hardware
Catalina 300 MPC feed/flush/diversion plumbing. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Housing is specific to this position; do not move a low-pressure housing to the pressure side.
Documented configurations
- Newport 1000 · MPC 3000 · Match installed voltage and hardware
- Newport 700 · MPC 3000 · Match installed voltage and hardware
Newport 700/1000 MPC 3000 feed/flush plumbing. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Housing is specific to this position; do not move a low-pressure housing to the pressure side.
Documented configurations
- Newport 400 · MPC 5000 · Match installed voltage and hardware
Newport 400 Mk I MAG feed/flush/diversion plumbing. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Housing is specific to this position; do not move a low-pressure housing to the pressure side.
Manuals & Resources
Filter Housing Reference
Filter Housing Reference
Identify the housing by its part number before choosing its seal or wrench. This chart compares housing hardware; it does not establish that every cartridge fits every housing.
| Housing | O-ring | Wrench | Identification note |
|---|---|---|---|
| FT-FTH-10L3PCS | SO-FHS-3PCS10 | FT-FHW-3PCS | Three-piece low-pressure housing |
| FT-FTH-10 | SO-FHS-LP10 | FT-FHW-10 | Legacy standard housing and wrench marked discontinued in the chart |
| FT-FTH-10L, FT-FTH-10H, KIT-HPHASSEM | SO-FHS-10H | FT-FHW-10H, FT-FHW-10HSS | Low-pressure, high-pressure and dual high-pressure housings shown in chart |
| FT-FTH-10BC3PC1 | SO-FHS-3PS20BB | FT-FHW-20BB3PCS | Chart code differs from store FT-FTH-10BC3P1; housing identity unresolved |
Spectra filter, housing, seal and wrench chart. The chart’s 10-3/4-inch housing label is not a measured cartridge length. Match cartridge length, outside diameter, media and end seals separately.
