Overview
Overview
SO-FHS-LP10 is the sealing O-ring shown for Spectra’s older FT-FTH-10 standard filter housing. It seals the housing joint when the bowl is reassembled after cartridge service.
Identify the housing itself before ordering. A 10-inch cartridge can be used in more than one housing design, and those housings do not necessarily share the same O-ring.
Specifications & Contents
Specifications & Contents
| Part number | SO-FHS-LP10 |
|---|---|
| Documented housing | FT-FTH-10 standard housing |
| Product scope | Housing sealing O-ring |
| Three-piece housing alternative | SO-FHS-3PCS10 for FT-FTH-10L3PCS |
| High-pressure housing alternative | SO-FHS-10H for FT-FTH-10H |
Fits My System
Fits My System
Spectra’s housing chart connects this seal to the older FT-FTH-10 design. Match the housing body and bowl profile in that chart; the present finder has no model-level connection for this individual seal.
FAQs
FAQs
Will any O-ring for a 10-inch filter fit?
No. The cartridge length does not identify the seal groove. Compare the housing model in Spectra’s chart, which separates standard, three-piece and high-pressure designs.
Manuals & Resources
Manuals & Resources
Filter Housing Reference
Filter Housing Reference
Identify the housing by its part number before choosing its seal or wrench. This chart compares housing hardware; it does not establish that every cartridge fits every housing.
| Housing | O-ring | Wrench | Identification note |
|---|---|---|---|
| FT-FTH-10L3PCS | SO-FHS-3PCS10 | FT-FHW-3PCS | Three-piece low-pressure housing |
| FT-FTH-10 | SO-FHS-LP10 | FT-FHW-10 | Legacy standard housing and wrench marked discontinued in the chart |
| FT-FTH-10L, FT-FTH-10H, KIT-HPHASSEM | SO-FHS-10H | FT-FHW-10H, FT-FHW-10HSS | Low-pressure, high-pressure and dual high-pressure housings shown in chart |
| FT-FTH-10BC3PC1 | SO-FHS-3PS20BB | FT-FHW-20BB3PCS | Chart code differs from store FT-FTH-10BC3P1; housing identity unresolved |
Spectra filter, housing, seal and wrench chart. The chart’s 10-3/4-inch housing label is not a measured cartridge length. Match cartridge length, outside diameter, media and end seals separately.