Spectra Watermakers

Spectra Watermakers 1/2" TUBE SS. FITTING HEX NUT PL-HWR-1/2HN

$9.00
Current stock: 0
Item #: PL-HWR-1/2HN
Availability:
Manuals & support

Start with your model’s parts diagram and the number on the installed part. Match any model, controls, voltage, or serial-range notes shown in this listing.

Spectra / Katadyn manufacturer support ↗
Overview

Overview

PL-HWR-1/2HN is the stainless hex nut shown on Spectra’s 1/2-inch high-pressure tube fittings. It surrounds the tube and tightens onto the fitting body to compress the ferrule.

The ferrule grips the tube; the nut and fitting body are separate pieces. The 1/2-inch designation describes the associated tube, not an established nut-thread diameter or wrench size.

Specifications & Contents

Specifications & Contents

Part numberPL-HWR-1/2HN
Associated tube size1/2 inch
Material descriptionStainless steel
ComponentCompression hex nut
Fits My System

Fits My System

Identify the component’s position in the cited Clark Pump assembly drawing. Listed installation quantities refer to that documented rebuild, not the quantity supplied per order.

Select your configuration to see its requirements, or open the complete reference below.

All documented configurations and requirements

Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.

Documented configurations

  • Bimini 300C · Connect · Match installed voltage and hardware

Bimini feed/filter/strainer/diversion plumbing. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.

Parts diagram / guide, page 86

Documented configurations

  • Cape Horn Extreme 330 · Deluxe · 12 VDC · Standard / long membranes · CH-330-12
  • Cape Horn Extreme 330 · Deluxe · 24 VDC · Standard / long membranes · CH-330-24

Cape Horn standard long pressure-vessel/feed B module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Requires long membrane arrangement for the illustrated module.

Parts diagram / guide, page 53

Documented configurations

  • Cape Horn Extreme 330R · Remote · 12 VDC · Standard / long membranes · CH-330R-12
  • Cape Horn Extreme 330R · Remote · 24 VDC · Standard / long membranes · CH-330R-24

Cape Horn Remote standard long pressure-vessel/feed B module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Requires long membrane arrangement for the illustrated module.

Parts diagram / guide, page 57

Documented configurations

  • Catalina 300 Mk II-Z · MPC 5000 · Match installed voltage and hardware

Catalina 300 Mk II-Z feed/flush/diversion plumbing. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.

Parts diagram / guide, page 94

Documented configurations

  • Catalina 340 Z · MPC 5000 · Match installed voltage and hardware

Catalina 340Z feed/boost/flush/diversion plumbing. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.

Parts diagram / guide, page 85

Documented configurations

  • Catalina 340C · Connect · 12 VDC · Compact / short membranes · CT-340C-12S
  • Catalina 340C · Connect · 24 VDC · Compact / short membranes · CT-340C-24S
  • Catalina 340C · Connect · 48 VDC · Compact / short membranes · CT-340C-48S

Catalina Connect compact pressure-vessel module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Requires compact membrane arrangement for the illustrated module.

Parts diagram / guide, page 75

Documented configurations

  • Catalina 340R · Remote · 12 VDC · Compact / short membranes · CT-340RS-12
  • Catalina 340R · Remote · 12 VDC · Standard / long membranes · CT-340R-12
  • Catalina 340R · Remote · 24 VDC · Compact / short membranes · CT-340RS-24
  • Catalina 340R · Remote · 24 VDC · Standard / long membranes · CT-340R-24
  • Catalina 340R · Remote · 48 VDC · Compact / short membranes · CT-340RS-48
  • Catalina 340R · Remote · 48 VDC · Standard / long membranes · CT-340R-48

Catalina Remote feed/filter/boost/flush plumbing. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.

Parts diagram / guide, page 60

Documented configurations

  • Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
  • Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware

part in its labeled subassembly: six-inch strainer, brine quick-connect or bronze fitting service component. Match installed strainer material/screen and individual fitting dimensions; no plastic-strainer or body/complete-fitting alias.

Parts diagram / guide, page 84

Documented configurations

  • Newport 1000C · Connect · 110 VAC · Standard / long membranes · NP-1000C-110
  • Newport 1000C · Connect · 220 VAC · Standard / long membranes · NP-1000C-220
  • Newport 1000C · Connect · 24 VDC · Standard / long membranes · NP-1000C-24
  • Newport 1000C · Connect · 48 VDC · Standard / long membranes · NP-1000C-48
  • Newport 700C · Connect · 110 VAC · Standard / long membranes · NP-700C-110
  • Newport 700C · Connect · 220 VAC · Standard / long membranes · NP-700C-220
  • Newport 700C · Connect · 24 VDC · Standard / long membranes · NP-700C-24
  • Newport 700C · Connect · 48 VDC · Standard / long membranes · NP-700C-48

Newport 700/1000 Connect standard pressure-vessel module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Requires long membrane arrangement for the illustrated module.

Parts diagram / guide, page 93

Documented configurations

  • Newport 400 Mk II-Z · MPC 5000 · Match installed voltage and hardware

Newport 400 Mk II-Z feed/boost/flush plumbing. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.

Parts diagram / guide, page 82

Documented configurations

  • Newport 400 Mk II-Z · MPC 5000 · Match installed voltage and hardware

Newport 400 Mk II-Z pressure-vessel module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Layout-specific rigid tubes excluded until standard/compact shape is resolved.

Parts diagram / guide, page 79

Documented configurations

  • Newport 400C · Connect · 12 VDC · Compact / short membranes · NP-400C-12S
  • Newport 400C · Connect · 12 VDC · Standard / long membranes · NP-400C-12
  • Newport 400C · Connect · 24 VDC · Compact / short membranes · NP-400C-24S
  • Newport 400C · Connect · 24 VDC · Standard / long membranes · NP-400C-24
  • Newport 400C · Connect · 48 VDC · Compact / short membranes · NP-400C-48S
  • Newport 400C · Connect · 48 VDC · Standard / long membranes · NP-400C-48

Newport 400 Connect feed/filter/boost/flush plumbing. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.

Parts diagram / guide, page 92

Documented configurations

  • Newport 400C · Connect · 12 VDC · Standard / long membranes · NP-400C-12
  • Newport 400C · Connect · 24 VDC · Standard / long membranes · NP-400C-24
  • Newport 400C · Connect · 48 VDC · Standard / long membranes · NP-400C-48

Newport 400 Connect standard pressure-vessel module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Requires long membrane arrangement for the illustrated module.

Parts diagram / guide, page 86

Documented configurations

  • Ventura 150 MPC · Match installed voltage and hardware
  • Ventura 200T MPC · Match installed voltage and hardware

Ventura MPC feed/flush/diversion plumbing. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.

Parts diagram / guide, page 80

Documented configurations

  • Ventura 150 MPC · Match installed voltage and hardware
  • Ventura 200T MPC · Match installed voltage and hardware

Ventura MPC short pressure-vessel module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.

Parts diagram / guide, page 77

Documented configurations

  • Ventura 150C · Connect · 12 VDC · Standard · VT-150C-12V
  • Ventura 150C · Connect · 24 VDC · Standard · VT-150C-24V
  • Ventura 200C · Connect · 12 VDC · Standard · VT-200C-12V
  • Ventura 200C · Connect · 24 VDC · Standard · VT-200C-24V

Ventura Connect filter/feed/flush plumbing. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.

Parts diagram / guide, page 77

Documented configurations

  • Ventura 150D · Deluxe · 12 VDC · Standard · VT-150-D-12V
  • Ventura 150D · Deluxe · 24 VDC · Standard · VT-150-D-24V
  • Ventura 200T · Deluxe · 12 VDC · Standard · VT-200-T-12
  • Ventura 200T · Deluxe · 24 VDC · Standard · VT-200-T-24

Ventura short pressure-vessel module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.

Parts diagram / guide, page 50

Documented configurations

  • Ventura 150R · Remote · 12 VDC · Standard · VT-150R-12
  • Ventura 150R · Remote · 24 VDC · Standard · VT-150R-24
  • Ventura 200R-T · Remote · 12 VDC · Standard · VT-200R-T-12
  • Ventura 200R-T · Remote · 24 VDC · Standard · VT-200R-T-24

Ventura Remote short pressure-vessel module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.

Parts diagram / guide, page 60

Manuals & Resources
Reviews

Customer reviews

Be the first to review this product.