Overview
Overview
EL-TM-RJ12COUP is the RJ-12 modular panel coupler shown in Spectra’s control-box parts drawings. It is the panel connection component, separate from the display cable and circuit board.
Match the panel opening and the installed connector arrangement. The RJ-12 name alone does not establish its wiring orientation or interchange with an RJ-45 pass-through.
Specifications & Contents
Specifications & Contents
| Part number | EL-TM-RJ12COUP |
|---|---|
| Manufacturer designation | RJ-12 modular coupler |
| Mounting | Panel |
Fits My System
Fits My System
Match the panel opening and the installed connector arrangement. The RJ-12 name alone does not establish its wiring orientation or interchange with an RJ-45 pass-through.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Catalina 340 Z · MPC 5000 · Match installed voltage and hardware
item in the identified generation and enclosure. Match switch poles/terminals, boot or enclosure dimensions, and instrument range/connection as applicable. A similar label on another control generation is not a substitution.
Documented configurations
- Catalina 340C · Connect · 12 VDC · Compact / short membranes · CT-340C-12S
- Catalina 340C · Connect · 12 VDC · Standard / long membranes · CT-340C-12
- Catalina 340C · Connect · 24 VDC · Compact / short membranes · CT-340C-24S
- Catalina 340C · Connect · 24 VDC · Standard / long membranes · CT-340C-24
- Catalina 340C · Connect · 48 VDC · Compact / short membranes · CT-340C-48S
- Catalina 340C · Connect · 48 VDC · Standard / long membranes · CT-340C-48
Catalina Connect motor/controller module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Controller without heatsink; board must carry programming and firmware for the exact model. A Connect interface alone does not establish interchangeability.
