Spectra Watermakers
Spectra Watermakers 24V Shurflo Feed Pump and Heat Sink Assembly KIT-FP-SF24
$415.00
Spectra Watermakers
Spectra Watermakers 12V Shurflo Feed Pump and Heat Sink Assembly KIT-FP-SF12
$415.00
Manuals & support
Start with your model’s parts diagram and the number on the installed part. Match any model, controls, voltage, or serial-range notes shown in this listing.
Spectra / Katadyn manufacturer support ↗Overview
Overview
KIT-FP-SF12 is the 12V DC Shurflo feed-pump assembly with its heat sink. The feed pump supplies water to the Clark Pump; it is a separate assembly from the Clark Pump and membrane module.
This is the assembly choice when both the pump/motor and heat sink are needed. Spectra’s parts bulletin distinguishes it from the bare pump/motor and the replacement pump head. The complete watermaker feed module also contains other plumbing and controls that are not defined by this pump-assembly SKU.
Specifications & Contents
Specifications & Contents
| Part number | KIT-FP-SF12 |
|---|---|
| Electrical supply | 12V DC |
| Included | Pump/motor, heat sink and pressure switch |
| Cooling fan | Not included |
| Alternative purchase scope | EL-FP-12V = pump/motor alone; PL-PMP-SFPH = pump head |
Fits My System
Fits My System
Identify a 12V Shurflo installation in the configuration list. A 12V and a 24V watermaker may look alike; use the motor label and the existing power supply to choose this assembly.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Cape Horn Extreme 330 · Deluxe · 12 VDC · Compact / short membranes · CH-330-12S
- Cape Horn Extreme 330 · Deluxe · 12 VDC · Standard / long membranes · CH-330-12
- Cape Horn Extreme 330R · Remote · 12 VDC · Compact / short membranes · CH-330R-12S
- Cape Horn Extreme 330R · Remote · 12 VDC · Standard / long membranes · CH-330R-12
- Model 200c · Classic / optional MPC 3000 · Match installed voltage and hardware
- Model 380c · Classic / optional MPC 3000 · Match installed voltage and hardware
- Gulfstream 400 · Auto panel / MPC era predecessor · Match installed voltage and hardware
- Santa Cruz · Manual panel · Match installed voltage and hardware
- Ventura 150 MPC · Match installed voltage and hardware
- Ventura 150C · Connect · 12 VDC · Standard · VT-150C-12V
- Ventura 150D · Deluxe · 12 VDC · Standard · VT-150-D-12V
- Ventura 150R · Remote · 12 VDC · Standard · VT-150R-12
- Ventura 200C · Connect · 12 VDC · Standard · VT-200C-12V
- Ventura 200R-T · Remote · 12 VDC · Standard · VT-200R-T-12
- Ventura 200T MPC · Match installed voltage and hardware
- Ventura 200T · Deluxe · 12 VDC · Standard · VT-200-T-12
12V Shurflo pump/motor assembly with heatsink; match installed pump voltage.
FAQs
FAQs
Is the cooling fan included with the heat sink?
No. Spectra explicitly excludes the fan from this assembly. A heat sink and a powered cooling fan are separate components.
Does this include the whole feed-pump module?
No. The pump/motor assembly should not be confused with the complete module’s strainer, flush filter, valves, plumbing and mounting structure.
