Spectra Watermakers

Spectra Watermakers 12/24V PWM Controller without Heat Sink EL-MTR-PWMWOHS

$540.00
Current stock: 0
Item #: EL-MTR-PWMWOHS
Manuals & support

Start with your model’s parts diagram and the number on the installed part. Match any model, controls, voltage, or serial-range notes shown in this listing.

Spectra / Katadyn manufacturer support ↗
Overview

Overview

EL-MTR-PWMWOHS is identified as the motor-speed controller in the Catalina 340C parts drawing. It sits within the control-box arrangement and is separately labeled from the Spectra Connect control board.

The catalog specifies a 12/24V PWM controller without a heat sink. Check the existing heat-sink and mounting arrangement when identifying this component; the drawing does not establish interchange with the PWMA assembly.

Specifications & Contents

Specifications & Contents

Part numberEL-MTR-PWMWOHS
Manufacturer componentMotor-speed controller
Catalog designation12/24V PWM; without heat sink
Fits My System

Fits My System

The catalog specifies a 12/24V PWM controller without a heat sink. Check the existing heat-sink and mounting arrangement when identifying this component; the drawing does not establish interchange with the PWMA assembly.

Select your configuration to see its requirements, or open the complete reference below.

All documented configurations and requirements

Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.

Documented configurations

  • Catalina 340C · Connect · 12 VDC · Compact / short membranes · CT-340C-12S
  • Catalina 340C · Connect · 12 VDC · Standard / long membranes · CT-340C-12
  • Catalina 340C · Connect · 24 VDC · Compact / short membranes · CT-340C-24S
  • Catalina 340C · Connect · 24 VDC · Standard / long membranes · CT-340C-24
  • Catalina 340C · Connect · 48 VDC · Compact / short membranes · CT-340C-48S
  • Catalina 340C · Connect · 48 VDC · Standard / long membranes · CT-340C-48

Catalina Connect motor/controller module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Controller without heatsink; board must carry programming and firmware for the exact model. A Connect interface alone does not establish interchangeability.

Parts diagram / guide, page 76

Manuals & Resources
Reviews

Customer reviews

Be the first to review this product.