Overview
Overview
KIT-HP20 is cataloged as a 20% Clark Pump assembly. The 20% design uses two piston rods side by side and Delrin cylinder pistons with replaceable seals. Its reversing-valve end blocks have 1-inch bores.
Pump percentage identifies a different mechanical arrangement. Select from the pump actually installed, including any replacement fitted since the watermaker was built. This listing does not establish a conversion between pump percentages.
Specifications & Contents
Specifications & Contents
| Part number | KIT-HP20 |
|---|---|
| Catalog pump version | 20% |
| Supply scope | Pump assembly; exact included external parts unverified |
Fits My System
Fits My System
Identify the component’s position in the cited Clark Pump assembly drawing. Listed installation quantities refer to that documented rebuild, not the quantity supplied per order.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Newport 1000C · Connect · 110 VAC · Standard / long membranes · NP-1000C-110
- Newport 1000C · Connect · 220 VAC · Standard / long membranes · NP-1000C-220
- Newport 1000C · Connect · 24 VDC · Standard / long membranes · NP-1000C-24
- Newport 1000C · Connect · 48 VDC · Standard / long membranes · NP-1000C-48
- Newport 700C · Connect · 110 VAC · Standard / long membranes · NP-700C-110
- Newport 700C · Connect · 220 VAC · Standard / long membranes · NP-700C-220
- Newport 700C · Connect · 24 VDC · Standard / long membranes · NP-700C-24
- Newport 700C · Connect · 48 VDC · Standard / long membranes · NP-700C-48
Newport 700/1000 Connect standard pressure-vessel module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Requires long membrane arrangement for the illustrated module.
