Spectra Watermakers

Spectra Watermakers Toggle Switch Boot Seal EL-SWT-TSBHC

$0.00
Current stock: 0
Item #: EL-SWT-TSBHC
Availability: Usually Ships in 1-2 Business Days - Email us for Availability
Manuals & support

Start with your model’s parts diagram and the number on the installed part. Match any model, controls, voltage, or serial-range notes shown in this listing.

Spectra / Katadyn manufacturer support ↗
Overview

Overview

EL-SWT-TSBHC is the protective boot seal shown over the toggle-switch location on Spectra’s control-box drawing. The toggle itself is separately identified as EL-SWT-TG-DPDT.

The boot covers the switch opening; replacing it does not replace the electrical contacts. Compare the installed boot and switch mounting before selecting the part.

Specifications & Contents

Specifications & Contents

Part numberEL-SWT-TSBHC
Manufacturer componentToggle-switch boot seal
Fits My System

Fits My System

The boot covers the switch opening; replacing it does not replace the electrical contacts. Compare the installed boot and switch mounting before selecting the part.

Select your configuration to see its requirements, or open the complete reference below.

All documented configurations and requirements

Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.

Documented configurations

  • Catalina 300 Mk II-Z · MPC 5000 · Match installed voltage and hardware

documented control-box hardware. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. switch/boot or empty enclosure in this control-box revision; board programming and other electronics are separate.

Parts diagram / guide, page 95

Documented configurations

  • Catalina 300 Mk II-Z · MPC 5000 · Match installed voltage and hardware

item in the identified generation and enclosure. Match switch poles/terminals, boot or enclosure dimensions, and instrument range/connection as applicable. A similar label on another control generation is not a substitution.

Parts diagram / guide, page 95

Documented configurations

  • Catalina 340 Z · MPC 5000 · Match installed voltage and hardware

item in the identified generation and enclosure. Match switch poles/terminals, boot or enclosure dimensions, and instrument range/connection as applicable. A similar label on another control generation is not a substitution.

Parts diagram / guide, page 82

Documented configurations

  • Catalina 340C · Connect · 12 VDC · Compact / short membranes · CT-340C-12S
  • Catalina 340C · Connect · 12 VDC · Standard / long membranes · CT-340C-12
  • Catalina 340C · Connect · 24 VDC · Compact / short membranes · CT-340C-24S
  • Catalina 340C · Connect · 24 VDC · Standard / long membranes · CT-340C-24
  • Catalina 340C · Connect · 48 VDC · Compact / short membranes · CT-340C-48S
  • Catalina 340C · Connect · 48 VDC · Standard / long membranes · CT-340C-48

Catalina Connect motor/controller module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Controller without heatsink; board must carry programming and firmware for the exact model. A Connect interface alone does not establish interchangeability.

Parts diagram / guide, page 76

Documented configurations

  • Catalina 340R · Remote · 12 VDC · Compact / short membranes · CT-340RS-12
  • Catalina 340R · Remote · 12 VDC · Standard / long membranes · CT-340R-12
  • Catalina 340R · Remote · 24 VDC · Compact / short membranes · CT-340RS-24
  • Catalina 340R · Remote · 24 VDC · Standard / long membranes · CT-340R-24
  • Catalina 340R · Remote · 48 VDC · Compact / short membranes · CT-340RS-48
  • Catalina 340R · Remote · 48 VDC · Standard / long membranes · CT-340R-48

item in the identified generation and enclosure. Match switch poles/terminals, boot or enclosure dimensions, and instrument range/connection as applicable. A similar label on another control generation is not a substitution.

Parts diagram / guide, page 59

Documented configurations

  • Farallon 1800C · Connect · 220 VAC · Standard / long membranes · FL-1800C-220
  • Farallon 2800C · Connect · 220 VAC · Standard / long membranes · FL-2800C-220

switch and boot on the documented Farallon Connect enclosure; retain matching poles and panel geometry.

Parts diagram / guide, page 73

Documented configurations

  • Newport 1000 Mk II · MPC 5000 · Match installed voltage and hardware
  • Newport 700 Mk II · MPC 5000 · Match installed voltage and hardware

item in the identified generation and enclosure. Match switch poles/terminals, boot or enclosure dimensions, and instrument range/connection as applicable. A similar label on another control generation is not a substitution.

Parts diagram / guide, page 59

Documented configurations

  • Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
  • Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware

item in the identified generation and enclosure. Match switch poles/terminals, boot or enclosure dimensions, and instrument range/connection as applicable. A similar label on another control generation is not a substitution.

Parts diagram / guide, page 85

Documented configurations

  • Newport 1000C · Connect · 110 VAC · Standard / long membranes · NP-1000C-110
  • Newport 1000C · Connect · 220 VAC · Standard / long membranes · NP-1000C-220
  • Newport 1000C · Connect · 24 VDC · Standard / long membranes · NP-1000C-24
  • Newport 1000C · Connect · 48 VDC · Standard / long membranes · NP-1000C-48
  • Newport 700C · Connect · 110 VAC · Standard / long membranes · NP-700C-110
  • Newport 700C · Connect · 220 VAC · Standard / long membranes · NP-700C-220
  • Newport 700C · Connect · 24 VDC · Standard / long membranes · NP-700C-24
  • Newport 700C · Connect · 48 VDC · Standard / long membranes · NP-700C-48

Newport Connect switch boot and local display. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Local display; remote kit and display-only purchases are different. Match mounting and firmware.

Parts diagram / guide, page 95

Documented configurations

  • Newport 400 Mk II · MPC 5000 · Match installed voltage and hardware

item in the identified generation and enclosure. Match switch poles/terminals, boot or enclosure dimensions, and instrument range/connection as applicable. A similar label on another control generation is not a substitution.

Parts diagram / guide, page 62

Documented configurations

  • Newport 400 Mk II-Z · MPC 5000 · Match installed voltage and hardware

documented control-box hardware. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. switch/boot or empty enclosure in this control-box revision; board programming and other electronics are separate.

Parts diagram / guide, page 82

Documented configurations

  • Newport 400 Mk II-Z · MPC 5000 · Match installed voltage and hardware

item in the identified generation and enclosure. Match switch poles/terminals, boot or enclosure dimensions, and instrument range/connection as applicable. A similar label on another control generation is not a substitution.

Parts diagram / guide, page 82

Documented configurations

  • Newport 400 · MPC 5000 · Match installed voltage and hardware

item in the identified generation and enclosure. Match switch poles/terminals, boot or enclosure dimensions, and instrument range/connection as applicable. A similar label on another control generation is not a substitution.

Parts diagram / guide, page 55

Documented configurations

  • Newport 400C · Connect · 12 VDC · Compact / short membranes · NP-400C-12S
  • Newport 400C · Connect · 12 VDC · Standard / long membranes · NP-400C-12
  • Newport 400C · Connect · 24 VDC · Compact / short membranes · NP-400C-24S
  • Newport 400C · Connect · 24 VDC · Standard / long membranes · NP-400C-24
  • Newport 400C · Connect · 48 VDC · Compact / short membranes · NP-400C-48S
  • Newport 400C · Connect · 48 VDC · Standard / long membranes · NP-400C-48

documented control-box hardware. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. switch/boot or empty enclosure in this control-box revision; board programming and other electronics are separate.

Parts diagram / guide, page 92

Documented configurations

  • Ventura 150C · Connect · 12 VDC · Standard · VT-150C-12V
  • Ventura 150C · Connect · 24 VDC · Standard · VT-150C-24V
  • Ventura 200C · Connect · 12 VDC · Standard · VT-200C-12V
  • Ventura 200C · Connect · 24 VDC · Standard · VT-200C-24V

documented control-box hardware. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. switch/boot or empty enclosure in this control-box revision; board programming and other electronics are separate.

Parts diagram / guide, page 78

Documented configurations

  • Ventura 150C · Connect · 12 VDC · Standard · VT-150C-12V
  • Ventura 150C · Connect · 24 VDC · Standard · VT-150C-24V
  • Ventura 200C · Connect · 12 VDC · Standard · VT-200C-12V
  • Ventura 200C · Connect · 24 VDC · Standard · VT-200C-24V

The documented Ventura Connect module uses an SPST switch and matching boot/enclosure. Do not substitute a DPDT switch based on a generic automated-model entry.

Parts diagram / guide, page 78

Manuals & Resources
Reviews

Customer reviews

Be the first to review this product.