Overview
Overview
PL-MTE-3/4S1/2B is the nickel-bronze high-pressure elbow identified in the Spectra parts guide. The illustrated fitting turns the tube connection at the pump-to-pressure-vessel line.
The older bronze-design listing and later stainless SL listing have different part numbers. The manufacturer drawing identifies the older elbow, but does not establish a direct material-upgrade substitution for every installed fitting.
Specifications & Contents
Specifications & Contents
| Part number | PL-MTE-3/4S1/2B |
|---|---|
| Manufacturer description | Nickel-bronze high-pressure elbow |
| Drawing location | Pump-to-pressure-vessel tubing |
Fits My System
Fits My System
Identify the component’s position in the cited Clark Pump assembly drawing. Listed installation quantities refer to that documented rebuild, not the quantity supplied per order.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Catalina 300 Mk II-Z · MPC 5000 · Match installed voltage and hardware
Original bronze elbow with 3/4-16 straight-thread end and half-inch tube connection, as pictured in this legacy assembly. Do not alias to KIT-MTE-3/4SX1/2SL or infer a current stainless replacement from dimensions alone.
Documented configurations
- Catalina 340 Z · MPC 5000 · Match installed voltage and hardware
Original bronze elbow with 3/4-16 straight-thread end and half-inch tube connection, as pictured in this legacy assembly. Do not alias to KIT-MTE-3/4SX1/2SL or infer a current stainless replacement from dimensions alone.
Documented configurations
- Newport 1000 Mk II · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II · MPC 5000 · Match installed voltage and hardware
Original bronze elbow with 3/4-16 straight-thread end and half-inch tube connection, as pictured in this legacy assembly. Do not alias to KIT-MTE-3/4SX1/2SL or infer a current stainless replacement from dimensions alone.
Documented configurations
- Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware
Original bronze elbow with 3/4-16 straight-thread end and half-inch tube connection, as pictured in this legacy assembly. Do not alias to KIT-MTE-3/4SX1/2SL or infer a current stainless replacement from dimensions alone.
Documented configurations
- Newport 400 Mk II · MPC 5000 · Match installed voltage and hardware
Original bronze elbow with 3/4-16 straight-thread end and half-inch tube connection, as pictured in this legacy assembly. Do not alias to KIT-MTE-3/4SX1/2SL or infer a current stainless replacement from dimensions alone.
Documented configurations
- Newport 400 Mk II-Z · MPC 5000 · Match installed voltage and hardware
Original bronze elbow with 3/4-16 straight-thread end and half-inch tube connection, as pictured in this legacy assembly. Do not alias to KIT-MTE-3/4SX1/2SL or infer a current stainless replacement from dimensions alone.
Documented configurations
- Ventura 150 MPC · Match installed voltage and hardware
- Ventura 200T MPC · Match installed voltage and hardware
Original bronze elbow with 3/4-16 straight-thread end and half-inch tube connection, as pictured in this legacy assembly. Do not alias to KIT-MTE-3/4SX1/2SL or infer a current stainless replacement from dimensions alone.