Spectra Watermakers

Spectra Watermakers MAG5. DRIVE VANE PUMP 240 GPH (C250) PL-PMP-240MAG5

$2,300.00
Current stock: 0
Item #: PL-PMP-240MAG5
Availability:
Manuals & support

Start with your model’s parts diagram and the number on the installed part. Match any model, controls, voltage, or serial-range notes shown in this listing.

Spectra / Katadyn manufacturer support ↗
Overview

Overview

PL-PMP-240MAG5 is the 240 MAG5 vane feed-pump head Spectra identifies for Newport 700 and Newport 1000 systems with that magnetic-drive arrangement. It is the water-moving head coupled to the motor, not the Clark Pump or the complete feed module.

The assembly drawing calls it 240 GPH C250. The current manufacturer product page uses a 250 PSI title. Keep feed-flow designation, pump identification and operating pressure separate; the watermaker’s fresh-water production is not 240 GPH simply because this head is installed.

Specifications & Contents

Specifications & Contents

Part numberPL-PMP-240MAG5
Drive typeMAG5 magnetic drive
Drawing designation240 GPH C250
Current manufacturer title240, 250 PSI
ScopeReplacement feed-pump head
Fits My System

Fits My System

The Newport Mk II spare-parts table specifically identifies this as the magnetic-drive head. Existing older direct-drive installations require their own pump or retrofit documentation; this head alone does not establish a conversion.

Select your configuration to see its requirements, or open the complete reference below.

All documented configurations and requirements

Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.

Documented configurations

  • Newport 1000 Mk II · MPC 5000 · Match installed voltage and hardware
  • Newport 700 Mk II · MPC 5000 · Match installed voltage and hardware

Installed MAG5 magnetic-drive Newport 700/1000 configuration; excludes older direct drive.

Parts diagram / guide, page 6

Documented configurations

  • Newport 1000 Mk II · MPC 5000 · Match installed voltage and hardware
  • Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
  • Newport 1000 · MPC 3000 · Match installed voltage and hardware
  • Newport 1000C · Connect · 110 VAC · Standard / long membranes · NP-1000C-110
  • Newport 1000C · Connect · 220 VAC · Standard / long membranes · NP-1000C-220
  • Newport 1000C · Connect · 24 VDC · Standard / long membranes · NP-1000C-24
  • Newport 1000C · Connect · 48 VDC · Standard / long membranes · NP-1000C-48
  • Newport 700 Mk II · MPC 5000 · Match installed voltage and hardware
  • Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware
  • Newport 700 · MPC 3000 · Match installed voltage and hardware
  • Newport 700C · Connect · 110 VAC · Standard / long membranes · NP-700C-110
  • Newport 700C · Connect · 220 VAC · Standard / long membranes · NP-700C-220
  • Newport 700C · Connect · 24 VDC · Standard / long membranes · NP-700C-24
  • Newport 700C · Connect · 48 VDC · Standard / long membranes · NP-700C-48

MAG5 magnetic-drive feed pump configuration only. Excludes older direct-drive pumps.

Parts diagram / guide, page 1

Documented configurations

  • Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
  • Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware

Installed MAG5 magnetic-drive Newport 700/1000 configuration; excludes older direct drive.

Parts diagram / guide, page 49

FAQs

FAQs

Does this include the electric motor?

Spectra identifies the product as a replacement feed-pump head and shows motors separately in the assembly drawings. Select the correct motor listing if that component also needs replacement.

Manuals & Resources
Reviews

Customer reviews

Be the first to review this product.