Spectra Watermakers
Spectra Watermakers 2 H.P. MOTOR 220 AC 3 PH, 1750 RPM EL-MTR-2HP220AC
$1,011.00
Manuals & support
Start with your model’s parts diagram and the number on the installed part. Match any model, controls, voltage, or serial-range notes shown in this listing.
Spectra / Katadyn manufacturer support ↗Overview
Overview
EL-MTR-2HP220AC is the 2 HP, 220V AC, three-phase motor identified in the Landbased 1800/4000 Connect manual. The drawing lists a speed of 1,750 RPM.
The manual shows this motor with the SPP5MCP-50 pump assembly and separately identifies the belt and driver pulley. A motor replacement therefore needs the installed drive arrangement as well as the electrical rating.
Use the motor nameplate and drive documentation to identify the three-phase motor circuit; the controller’s incoming supply specification is a separate value.
Specifications & Contents
Specifications & Contents
| Part number | EL-MTR-2HP220AC |
|---|---|
| Motor | 2 HP; 220V AC; three-phase |
| Speed | 1,750 RPM |
| Documented assembly | Landbased 1800/4000 Connect PP5 drive |
Fits My System
Fits My System
Use the motor nameplate and drive documentation to identify the three-phase motor circuit; the controller’s incoming supply specification is a separate value.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Farallon 1800C · Connect · 220 VAC · Standard / long membranes · FL-1800C-220
- Farallon 2800C · Connect · 220 VAC · Standard / long membranes · FL-2800C-220
Illustrated 2HP 220V three-phase 1750 RPM motor and matching drive. Only units with this motor/drive configuration; do not extend to a 1HP drive from the adjacent parts page. System input: 220 V; retain the specified component supply and wiring.