Overview
Overview
Spectra labels SUB-NP-MK2-ILHA as the Newport MkII 700/1K inlet hose assembly and explicitly specifies a 10-foot length. The assembly is pictured with end fittings.
The same callout lists PL-HS-3/4PVCGR as hose without end fittings. That distinction matters when choosing between a finished replacement assembly and hose that still needs to be fitted.
Specifications & Contents
Specifications & Contents
| Part number | SUB-NP-MK2-ILHA |
|---|---|
| Manufacturer length | 10 feet (3.048 m) |
| Documented models | Newport 700/1000 Connect and MkII-Z |
| Comparison | PL-HS-3/4PVCGR is the hose without end fittings |
Fits My System
Fits My System
Use the cited assembly and revision to identify this part. Existing documented configuration records appear below; other installations are not established by this example.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Newport 1000 Mk II · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II · MPC 5000 · Match installed voltage and hardware
Manufacturer-approved retrofit for Newport 700/1000 Mk II with the original rigid feed-to-Clark tubing. Especially identifies systems shipped before October 2009. Excludes Mk I; record an installed retrofit before selecting later service parts.
Documented configurations
- Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware
Documented 10-foot Newport 700/1000 inlet hose assembly; preserve its end connections. The historical retrofit concerns Mk II units with rigid feed-to-Clark tubing, especially pre-October 2009 units; it does not establish a Mk I retrofit.
Parts diagram / guide, page 89 · Parts diagram / guide, page 1
Documented configurations
- Newport 1000C · Connect · 110 VAC · Standard / long membranes · NP-1000C-110
- Newport 1000C · Connect · 220 VAC · Standard / long membranes · NP-1000C-220
- Newport 1000C · Connect · 24 VDC · Standard / long membranes · NP-1000C-24
- Newport 1000C · Connect · 48 VDC · Standard / long membranes · NP-1000C-48
- Newport 700C · Connect · 110 VAC · Standard / long membranes · NP-700C-110
- Newport 700C · Connect · 220 VAC · Standard / long membranes · NP-700C-220
- Newport 700C · Connect · 24 VDC · Standard / long membranes · NP-700C-24
- Newport 700C · Connect · 48 VDC · Standard / long membranes · NP-700C-48
Documented 10-foot Newport 700/1000 inlet hose assembly; preserve its end connections. The historical retrofit concerns Mk II units with rigid feed-to-Clark tubing, especially pre-October 2009 units; it does not establish a Mk I retrofit.
Parts diagram / guide, page 101 · Parts diagram / guide, page 1
