Spectra Watermakers

Spectra Watermakers SPOOL PISTON O-RING 1" SO-HPP-SP1

$4.00
Current stock: 0
Item #: SO-HPP-SP1
Availability: Usually Ships in 1-2 Business Days - Email us for Availability
Manuals & support

Start with your model’s parts diagram and the number on the installed part. Match any model, controls, voltage, or serial-range notes shown in this listing.

Spectra / Katadyn manufacturer support ↗
Overview

Overview

SO-HPP-SP1 is the spool-piston O-ring used in the 20% Clark Pump reversing-valve end blocks. The guide shows this seal in the bore groove before the spool piston is fitted.

The associated end-block bore is 1 inch, compared with 1-1/4 inches on the documented 7%/10% pumps. Select SP1 for the identified 20% arrangement; the “1 inch” description does not provide the seal’s full inside diameter and cross-section.

Specifications & Contents

Specifications & Contents

Part numberSO-HPP-SP1
Guide pump version20%
Associated end-block bore1 inch
Illustrated usage2; not package quantity
Fits My System

Fits My System

Identify the component’s position in the cited Clark Pump assembly drawing. Listed installation quantities refer to that documented rebuild, not the quantity supplied per order.

Select your configuration to see its requirements, or open the complete reference below.

All documented configurations and requirements

Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.

Documented configurations

  • Newport 1000 Mk II · MPC 5000 · Match installed voltage and hardware
  • Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
  • Newport 1000 · MPC 3000 · Match installed voltage and hardware
  • Newport 1000C · Connect · 110 VAC · Standard / long membranes · NP-1000C-110
  • Newport 1000C · Connect · 220 VAC · Standard / long membranes · NP-1000C-220
  • Newport 1000C · Connect · 24 VDC · Standard / long membranes · NP-1000C-24
  • Newport 1000C · Connect · 48 VDC · Standard / long membranes · NP-1000C-48
  • Newport 700 Mk II · MPC 5000 · Match installed voltage and hardware
  • Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware
  • Newport 700 · MPC 3000 · Match installed voltage and hardware
  • Newport 700C · Connect · 110 VAC · Standard / long membranes · NP-700C-110
  • Newport 700C · Connect · 220 VAC · Standard / long membranes · NP-700C-220
  • Newport 700C · Connect · 24 VDC · Standard / long membranes · NP-700C-24
  • Newport 700C · Connect · 48 VDC · Standard / long membranes · NP-700C-48

Installed 20% Clark pump matching the May 2024 rebuild-manual design. component in the cited pump assembly; identify actual ratio and revision after any retrofit. Excludes rare 15% pumps and unverified older revisions.

Parts diagram / guide, page 4 · Parts diagram / guide, page 62 · Parts diagram / guide, page 1

Manuals & Resources
Reviews

Customer reviews

Be the first to review this product.