Spectra Watermakers
Spectra Watermakers SPECTRA CONNECT REMOTE CONTROL DISP.4.3" W/CBL. KIT-SC-RMPNL
$863.00
Overview
Overview
KIT-SC-RMPNLL is the 4.3-inch local Connect display in Spectra’s reference. The images locate it on the system module, distinguishing it from the separately shown remote display with a long cable.
Use the local-display identity and the installed Connect revision when selecting this part. The 100-foot cable claim belongs to the remote-display kit and is not a documented inclusion for this local unit.
Specifications & Contents
Specifications & Contents
| Part number | KIT-SC-RMPNLL |
|---|---|
| Display size | 4.3 inches |
| Location | Local, on the watermaker module |
| System | Spectra Connect |
| Included cabling | Not established for this local-display listing |
Fits My System
Fits My System
Match the documented assembly, installed connections and hardware revision. Existing configuration records are retained below; the illustrated application does not establish universal fit.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Newport 1000C · Connect · 110 VAC · Standard / long membranes · NP-1000C-110
- Newport 1000C · Connect · 220 VAC · Standard / long membranes · NP-1000C-220
- Newport 1000C · Connect · 24 VDC · Standard / long membranes · NP-1000C-24
- Newport 1000C · Connect · 48 VDC · Standard / long membranes · NP-1000C-48
- Newport 700C · Connect · 110 VAC · Standard / long membranes · NP-700C-110
- Newport 700C · Connect · 220 VAC · Standard / long membranes · NP-700C-220
- Newport 700C · Connect · 24 VDC · Standard / long membranes · NP-700C-24
- Newport 700C · Connect · 48 VDC · Standard / long membranes · NP-700C-48
Newport Connect switch boot and local display. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Local display; remote kit and display-only purchases are different. Match mounting and firmware. Newport local display requires the preinstalled white four-wire JST connection above the prefilters; it does not accept Ethernet input.