Overview
Overview
HP-CB-CB7 is the 7% Clark Pump center block. The pilot and check valves are housed in this central component between the cylinder assemblies.
Although the 7% and 10% pumps share many components, their center blocks, piston rods and rod seals differ. The 7% block belongs with the smaller-rod arrangement illustrated in the rebuild guide.
The catalog specifies this block without inserts; HP-CB-INS is separately identified in the factory assembly process.
Specifications & Contents
Specifications & Contents
| Part number | HP-CB-CB7 |
|---|---|
| Pump version | 7% |
| Catalog supply scope | Without inserts |
Fits My System
Fits My System
Confirm the actual 7% Clark Pump fitted to the system before selecting the center block.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Ventura 150 MPC · Match installed voltage and hardware
- Ventura 150C · Connect · 12 VDC · Standard · VT-150C-12V
- Ventura 150C · Connect · 24 VDC · Standard · VT-150C-24V
- Ventura 150D · Deluxe · 12 VDC · Standard · VT-150-D-12V
- Ventura 150D · Deluxe · 24 VDC · Standard · VT-150-D-24V
- Ventura 150R · Remote · 12 VDC · Standard · VT-150R-12
- Ventura 150R · Remote · 24 VDC · Standard · VT-150R-24
Installed 7% Clark pump matching the May 2024 rebuild-manual design. component in the cited pump assembly; identify actual ratio and revision after any retrofit. Excludes rare 15% pumps and unverified older revisions.
Parts diagram / guide, page 4 · Parts diagram / guide, page 37 · Parts diagram / guide, page 1