Overview
Overview
EL-SSR-IFM measures inline product-water flow in the documented Catalina and Newport arrangements. Spectra specifies a 0.5–5 L/min range and two male 3/8-inch NPT connections.
The February 2023 bulletin describes this replacement sensor as supplied with bare wires. It identifies SUB-MPC-IFA for customers needing a Molex-equipped replacement.
Check both the plumbing size and the existing electrical connector. The lower-range IFMLR has smaller threaded ends, and the marine Connect production change to Deutsch connectors does not mean every replacement includes that plug.
Specifications & Contents
Specifications & Contents
| Part number | EL-SSR-IFM |
|---|---|
| Documented flow range | 0.5–5 L/min |
| Threaded ends | Two male 3/8-inch NPT |
| Replacement wiring bulletin | Bare wires; SUB-MPC-IFA is Molex option |
Fits My System
Fits My System
Check both the plumbing size and the existing electrical connector. The lower-range IFMLR has smaller threaded ends, and the marine Connect production change to Deutsch connectors does not mean every replacement includes that plug.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Bimini 300C · Connect · Match installed voltage and hardware
documented Connect sensor/diversion assembly. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Match the sensor range, connector and manifold position. Component voltage can differ from system input; use the documented control supply. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 86 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Catalina 300 Mk II-Z · MPC 5000 · Match installed voltage and hardware
Standard-range inline sensor in the documented Catalina/Newport product-water module. Match 0.5–5 L/min range and 3/8-inch NPT ports. Replacement EL-SSR-IFM is supplied with bare wires per the 2023 bulletin; Molex-terminated assembly is SUB-MPC-IFA. Match the installed connection before ordering. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 94 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Catalina 300 · MPC 5000 · Match installed voltage and hardware
Standard-range inline sensor in the documented Catalina/Newport product-water module. Match 0.5–5 L/min range and 3/8-inch NPT ports. Replacement EL-SSR-IFM is supplied with bare wires per the 2023 bulletin; Molex-terminated assembly is SUB-MPC-IFA. Match the installed connection before ordering. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 56 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Catalina 340 Z · MPC 5000 · Match installed voltage and hardware
Standard-range inline sensor in the documented Catalina/Newport product-water module. Match 0.5–5 L/min range and 3/8-inch NPT ports. Replacement EL-SSR-IFM is supplied with bare wires per the 2023 bulletin; Molex-terminated assembly is SUB-MPC-IFA. Match the installed connection before ordering. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 85 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Catalina 340C · Connect · 12 VDC · Compact / short membranes · CT-340C-12S
- Catalina 340C · Connect · 12 VDC · Standard / long membranes · CT-340C-12
- Catalina 340C · Connect · 24 VDC · Compact / short membranes · CT-340C-24S
- Catalina 340C · Connect · 24 VDC · Standard / long membranes · CT-340C-24
- Catalina 340C · Connect · 48 VDC · Compact / short membranes · CT-340C-48S
- Catalina 340C · Connect · 48 VDC · Standard / long membranes · CT-340C-48
documented Connect sensor/diversion assembly. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Match the sensor range, connector and manifold position. Component voltage can differ from system input; use the documented control supply. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 79 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Newport 1000 Mk II · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II · MPC 5000 · Match installed voltage and hardware
Standard-range inline sensor in the documented Catalina/Newport product-water module. Match 0.5–5 L/min range and 3/8-inch NPT ports. Replacement EL-SSR-IFM is supplied with bare wires per the 2023 bulletin; Molex-terminated assembly is SUB-MPC-IFA. Match the installed connection before ordering. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 61 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware
Standard-range inline sensor in the documented Catalina/Newport product-water module. Match 0.5–5 L/min range and 3/8-inch NPT ports. Replacement EL-SSR-IFM is supplied with bare wires per the 2023 bulletin; Molex-terminated assembly is SUB-MPC-IFA. Match the installed connection before ordering. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 86 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Newport 1000 · MPC 3000 · Match installed voltage and hardware
- Newport 700 · MPC 3000 · Match installed voltage and hardware
Standard-range inline sensor in the documented Catalina/Newport product-water module. Match 0.5–5 L/min range and 3/8-inch NPT ports. Replacement EL-SSR-IFM is supplied with bare wires per the 2023 bulletin; Molex-terminated assembly is SUB-MPC-IFA. Match the installed connection before ordering. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 65 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Newport 1000C · Connect · 110 VAC · Standard / long membranes · NP-1000C-110
- Newport 1000C · Connect · 220 VAC · Standard / long membranes · NP-1000C-220
- Newport 1000C · Connect · 24 VDC · Standard / long membranes · NP-1000C-24
- Newport 1000C · Connect · 48 VDC · Standard / long membranes · NP-1000C-48
- Newport 700C · Connect · 110 VAC · Standard / long membranes · NP-700C-110
- Newport 700C · Connect · 220 VAC · Standard / long membranes · NP-700C-220
- Newport 700C · Connect · 24 VDC · Standard / long membranes · NP-700C-24
- Newport 700C · Connect · 48 VDC · Standard / long membranes · NP-700C-48
documented Connect sensor/diversion assembly. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Match the sensor range, connector and manifold position. Component voltage can differ from system input; use the documented control supply. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 96 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Newport 400 Mk II · MPC 5000 · Match installed voltage and hardware
Standard-range inline sensor in the documented Catalina/Newport product-water module. Match 0.5–5 L/min range and 3/8-inch NPT ports. Replacement EL-SSR-IFM is supplied with bare wires per the 2023 bulletin; Molex-terminated assembly is SUB-MPC-IFA. Match the installed connection before ordering. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 61 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Newport 400 Mk II-Z · MPC 5000 · Match installed voltage and hardware
Standard-range inline sensor in the documented Catalina/Newport product-water module. Match 0.5–5 L/min range and 3/8-inch NPT ports. Replacement EL-SSR-IFM is supplied with bare wires per the 2023 bulletin; Molex-terminated assembly is SUB-MPC-IFA. Match the installed connection before ordering. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 80 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Newport 400 · MPC 5000 · Match installed voltage and hardware
Standard-range inline sensor in the documented Catalina/Newport product-water module. Match 0.5–5 L/min range and 3/8-inch NPT ports. Replacement EL-SSR-IFM is supplied with bare wires per the 2023 bulletin; Molex-terminated assembly is SUB-MPC-IFA. Match the installed connection before ordering. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 55 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Documented configurations
- Newport 400C · Connect · 12 VDC · Compact / short membranes · NP-400C-12S
- Newport 400C · Connect · 12 VDC · Standard / long membranes · NP-400C-12
- Newport 400C · Connect · 24 VDC · Compact / short membranes · NP-400C-24S
- Newport 400C · Connect · 24 VDC · Standard / long membranes · NP-400C-24
- Newport 400C · Connect · 48 VDC · Compact / short membranes · NP-400C-48S
- Newport 400C · Connect · 48 VDC · Standard / long membranes · NP-400C-48
documented Connect sensor/diversion assembly. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. Match the sensor range, connector and manifold position. Component voltage can differ from system input; use the documented control supply. Standard sensor: 0.5–5 L/min, 3/8-inch NPT; Molex assembly SUB-MPC-IFA. The 2023 marine Connect production change uses a three-pin Deutsch connector; replacement bare-sensor SKU is supplied with bare wires. Do not assume an order arrives with a Deutsch plug.
Parts diagram / guide, page 89 · Parts diagram / guide, page 1 · Parts diagram / guide, page 1
Manuals & Resources
Reviews
Customer reviews
Be the first to review this product.
Related Products
Spectra Watermakers
Spectra Watermakers Inline Flow Sensor Assembly For Sp-5 Based Systems SUB-MPC-IFASP5
$0.00