Overview
Overview
EL-BRK-30ADP is the 30A double-pole AC/DC toggle breaker shown with the Newport 700/1000 24V DC feed-pump arrangement.
The older MkII drawing also labels this part for 110V AC and 24V DC versions. Its location and rating must be checked against the specific system revision.
This is a circuit-protection part. Match the existing approved breaker and diagram; a 30A label does not make it a replacement for the 10A or 15A listings.
Specifications & Contents
Specifications & Contents
| Part number | EL-BRK-30ADP |
|---|---|
| Manufacturer designation | 30A; double-pole; AC/DC toggle breaker |
| Documented example | Newport 700/1000 24V DC module |
Fits My System
Fits My System
This is a circuit-protection part. Match the existing approved breaker and diagram; a 30A label does not make it a replacement for the 10A or 15A listings.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Newport 1000 Mk II · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II · MPC 5000 · Match installed voltage and hardware
30A double-pole breaker specified for the legacy 110VAC circuit. This legacy assignment must not be copied into newer Connect wiring. System input: 110 V; retain the specified component supply and wiring.
Documented configurations
- Newport 1000 Mk II · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II · MPC 5000 · Match installed voltage and hardware
The legacy diagram explicitly also assigns the 30A breaker to 24V DC. Match the original Mk II electrical assembly. System input: 24 V; retain the specified component supply and wiring.
Documented configurations
- Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware
30A double-pole breaker specified for the legacy 110VAC circuit. This legacy assignment must not be copied into newer Connect wiring. System input: 110 V; retain the specified component supply and wiring.
Documented configurations
- Newport 1000 Mk II-Z · MPC 5000 · Match installed voltage and hardware
- Newport 700 Mk II-Z · MPC 5000 · Match installed voltage and hardware
30A double-pole breaker in the documented Mk II-Z 24V DC assembly. System input: 24 V; retain the specified component supply and wiring.
Documented configurations
- Newport 1000C · Connect · 24 VDC · Standard / long membranes · NP-1000C-24
- Newport 700C · Connect · 24 VDC · Standard / long membranes · NP-700C-24
Newport 700/1000 24V electrical module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only. System input: 24V; retain the documented component supply and wiring. 24V module; control board needs correct model firmware. Historical PWMA24-to-PWMA order-code equivalence remains a separate issue.