Overview
Overview
PL-NP-3/4X2 is the polypropylene nipple identified in the Ventura Deluxe and Ventura Connect/MPC feed-module drawings. Spectra’s callout gives a 3/4-inch NPT size and a 2-inch length.
The 2-inch value is the nipple length, not a second thread diameter. This longer connector is shown in the plumbing near the three-way valve, hose-barb tee and check valve.
Specifications & Contents
Specifications & Contents
| Part number | PL-NP-3/4X2 |
|---|---|
| Thread size | 3/4 inch NPT |
| Listed length | 2 inches |
| Material | Polypropylene |
Fits My System
Fits My System
Match the connection sizes and the installation conditions in the cited drawing. A documented example does not establish universal fit or a pressure rating.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Ventura 150D · Deluxe · 12 VDC · Standard · VT-150-D-12V
- Ventura 150D · Deluxe · 24 VDC · Standard · VT-150-D-24V
- Ventura 200T · Deluxe · 12 VDC · Standard · VT-200-T-12
- Ventura 200T · Deluxe · 24 VDC · Standard · VT-200-T-24
Ventura Deluxe feed and manual flush modules. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.
Documented configurations
- Ventura 150R · Remote · 12 VDC · Standard · VT-150R-12
- Ventura 150R · Remote · 24 VDC · Standard · VT-150R-24
- Ventura 200R-T · Remote · 12 VDC · Standard · VT-200R-T-12
- Ventura 200R-T · Remote · 24 VDC · Standard · VT-200R-T-24
Ventura Remote feed and flush modules. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.