Spectra Watermakers 3/8" NPT X 5/8" HOSE BARB ELL NYLON PL-HBE-3/8X5/8

1. Factory-spec hose/tubing for Spectra/Daily Watermakers plumbing connections (feed, flush, brine, or product water depending on application).
2. Replace if the hose is brittle, cracked, kinked, chafed, or if fittings no longer seal reliably.
3. Best practice: verify by part number and system model/serial before ordering, especially on older or modified systems.

Key Fitment Details

• Part No.: PL-HBE-3/8X5/8
• Port/Thread: 3/8" NPT
• Material: NYLON
• Common Sizes Mentioned: 3/8", 5/8"

F.A.Q.

1. What is this part used for?
   Factory-spec hose/tubing for Spectra/Daily Watermakers plumbing connections (feed, flush, brine, or product water depending on application).
2. How do I confirm it is the correct one?
   Match the part number and compare key specs (sizes, voltage, ports). If you have your watermaker model and serial number, we can confirm before you order.
3. Any service tips?
   Confirm ID/OD and end style (barb/compression/quick-connect), route to avoid chafe, and re-check clamps after the first run cycle.
4. Good to know:
   If your system uses crimped ends, a complete hose assembly may be required for an exact OEM replacement.

USED ON THE FOLLOWING MODELS (but not limited to):

VENTURA 150-D

VENTURA 150-MPC

VENTURA 200T-D

VENTURA 200T-MPC

CAPEHORN XTREME

CATALINA 340Z

CATALINA 300MKII

NEWPORT MODELS

Compatibility can vary by configuration - confirm by part number.

Additional Parts You Might Consider: 

Spectra 5 Micron Filter

Spectra 20 Micron Filter

Spectra SC-1 Storage Compound

Questions? Visit our Contact Page to speak to our watermaker experts.

We Ship Internationally, Contact us For a Shipping Quote!