Overview
Overview
PL-FMT-10 is Spectra’s mechanical product-water flow meter with a 10-gallon-per-hour range. The visible ball provides a local flow indication on the instrument panel; it is different from the electronic inline flow sensor used by automatic controls.
Spectra’s Dwyer flow-meter service bulletin explains that the meter can be dismantled for cleaning when the bore becomes hard to read or the ball sticks. Use that procedure before assuming a dirty meter needs replacement.
Specifications & Contents
Specifications & Contents
| Part number | PL-FMT-10 |
|---|---|
| Manufacturer range | 10 GPH (gallons per hour) |
| Instrument type | Mechanical ball-type flow meter |
| Documented panel | Ventura Deluxe |
| Service reference | Dwyer flow-meter service bulletin in Ventura Deluxe manual |
Fits My System
Fits My System
Match the documented assembly, installed connections and hardware revision. Existing configuration records are retained below; the illustrated application does not establish universal fit.
Select your configuration to see its requirements, or open the complete reference below.
All documented configurations and requirements
Each group applies only to the listed configurations and installed hardware. Match the conditions and manufacturer references before ordering.
Documented configurations
- Ventura 150D · Deluxe · 12 VDC · Standard · VT-150-D-12V
- Ventura 150D · Deluxe · 24 VDC · Standard · VT-150-D-24V
- Ventura 200T · Deluxe · 12 VDC · Standard · VT-200-T-12
- Ventura 200T · Deluxe · 24 VDC · Standard · VT-200-T-24
Ventura sample/strainer/accumulator assembly. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.
Documented configurations
- Ventura 150R · Remote · 12 VDC · Standard · VT-150R-12
- Ventura 150R · Remote · 24 VDC · Standard · VT-150R-24
- Ventura 200R-T · Remote · 12 VDC · Standard · VT-200R-T-12
- Ventura 200R-T · Remote · 24 VDC · Standard · VT-200R-T-24
Ventura Remote panel/strainer module. Match installed assembly, port/thread or tube dimensions, material and pressure duty; documented original arrangement only.